Nowadays, we are witnessing an era marked by the autonomy of wireless devices and sensor networks without the aid of batteries. RF energy harvesting therefore becomes a promising alternative for battery dependence. This work presents the design of an RF energy harvesting system consisting mainly of a rectenna (antenna and rectification circuit) and an adaptation circuit. First of all, we designed two dipole type antennas. One operates in the GSM 900 MHz band and the other in the GSM 1800 MHz band. The performances of the proposed antennas are provided by the ANSYS HFSS software. Secondly, we proposed two rectification circuits in order to obtain conversion efficiencies at 0 dBm of 64% for the system operating at the frequency of 900 MHz and 37% for the system at the frequency of 1800 MHz RF-DC. The rectifiers used are based on Schottky diodes. For maximum transfer of power between the antenna and the rectification circuit, L-type matching circuits have been proposed. This rectifier offers DC voltage values of 806 mV for the circuit at the frequency of 900 MHz and 616 mV for the circuit at the frequency of 1800 MHz. The adaptation circuits are obtained by carrying out simulations on the ADS (Advanced Design System) software.
Loading....