Current Issue : January-March Volume : 2024 Issue Number : 1 Articles : 5 Articles
The proposed 8-Transistor (8T) Physically Unclonable Function (PUF), in conjunction with the power gating technique, can significantly accelerate a single evaluation cycle more than 100,000 times faster than a 6-Transistor (6T) Static Random-Access Memory (SRAM) PUF. The 8T PUF is built to swiftly eliminate data remanence and maximise physical mismatch. Moreover, a two-phase power gating module is devised to provide controllable power on/off cycles for the chosen PUF clusters in order to facilitate fast statistical measurements and curb the in-rush current. The architecture and hardware implementation of the power-gated PUF are developed to accommodate fast multiple evaluations of PUF Responses. The fast speed enables a new data processing method, which coordinates Dark-bit masking and Multiple Temporal Majority Voting (TMV) in different Process, Voltage and Temperature (PVT) corners or during field usage, hence greatly reducing the Bit Error Rate (BER) and the hardware penalty for error correction. The designs are based on the UMC 65 nm technology and aim to tape out an Application-Specific Integrated Circuit (ASIC) chip. Post-layout Monte Carlo (MC) simulations are performed with Cadence, and the extracted PUF Responses are processed with Matlab to evaluate the 8T PUF performance and statistical metrics for subsequent inclusion in PUF Responses, which comprise the novelty of this approach....
Because of its small size, high frequency transformers are widely used to maximize energy transfer. However, the leakage inductance and distributed capacitance of high frequency transformer can not only cause resonance, but also lead to transient changes of voltage and current in high frequency, which can lead to voltage spike, so that the switch tube is damaged. For transformers with the same output power, high-frequency transformers are much smaller and have lower calorific value than low-frequency transformers. Therefore, at present, many consumer electronics and network product power adapters are switching power supplies, and the internal high-frequency transformer is the most important component of switching power supplies. The basic principle is to turn the input alternating current into DC first, and then turn it into high frequency through a transistor or FET, etc., through a high-frequency transformer to change voltage, and then rectify the output again, plus other control parts, and stabilize the output DC voltage. In this thesis, we choose a more rational and cost effective winding structure, choose a more appropriate core material based on the comparison of different core materials, research on the insulation and cooling properties of transformer so as to improve the insulation properties of the transformer, make it safer and more efficient. The study has important significance to decrease the power loss of high frequency transformer and decrease the size of high frequency transformer....
This paper presents a versatile, low-cost real-time control platform with embedded isolated inputs and outputs for direct usage in electrical applications. The inputs correspond to voltage and current measurements, while the outputs are digital signals with isolated power supply. The validation for the platform considers the implementation of the power electronics topologies where the control algorithms are implemented in Simulink. The topologies are the interleaved three-phase buck converter, push–pull converter, H-bridge, and thyristor-based AC load controller. The control for them involves voltage feedback, current feedback, linear control algorithms, and the implementation of a discrete PLL algorithm for the last topology. Hence, the platform demonstrates the effectiveness of performing real-time control for some power electronics topologies....
As implantable medical electronics (IMEs) developed for healthcare monitoring and biomedical therapy are extensively explored and deployed clinically, the demand for non-invasive implantable biomedical electronics is rapidly surging. Current rigid and bulky implantable microelectronic power sources are prone to immune rejection and incision, or cannot provide enough energy for long-term use, which greatly limits the development of miniaturized implantable medical devices. Herein, a comprehensive review of the historical development of IMEs and the applicable miniaturized power sources along with their advantages and limitations is given. Despite recent advances in microfabrication techniques, biocompatible materials have facilitated the development of IMEs system toward non-invasive, ultra-flexible, bioresorbable, wireless and multifunctional, progress in the development of minimally invasive power sources in implantable systems has remained limited. Here three promising minimally invasive power sources summarized, including energy storage devices (biodegradable primary batteries, rechargeable batteries and supercapacitors), human body energy harvesters (nanogenerators and biofuel cells) and wireless power transfer (far-field radiofrequency radiation, near-field wireless power transfer, ultrasonic and photovoltaic power transfer). The energy storage and energy harvesting mechanism, configurational design, material selection, output power and in vivo applications are also discussed. It is expected to give a comprehensive understanding of the minimally invasive power sources driven IMEs system for painless health monitoring and biomedical therapy with long-term stable functions....
Flip-flop (FF) serves as a fundamental unit in various sequential logic circuits and complex digital electronic systems for generating, transforming, and temporarily storing digital signals. Nonvolatility plays a crucial role in FFs by ensuring instant data recovery after unexpected data loss. Nonvolatile flip-flop can quickly recover in a self-powered environment, making it suitable for application environments such as the Internet of Things (IOT). Unfortunately, most existing nonvolatile FFs (NVFFs) suffer from extended delays and high energy consumption during data backup and restore operations. In this paper, we propose two innovative voltage-controlled nonvolatile FFs (VC-FFs), namely VC-DFF (voltage-controlled D-FF) and VC-SRFF (voltage-controlled SR-FF), which address these challenges using voltage-controlled spin-orbit torque (VC-SOT) devices. The proposed designs are evaluated using a 40 nm CMOS process. Simulation results demonstrate that the proposed designs achieve significant improvements in write (recovery) energy consumption, with over 7.2× (1.54×) and 18.7× (2×) enhancements compared to their STT- and SOT-based counterparts, respectively....
Loading....