Current Issue : April-June Volume : 2024 Issue Number : 2 Articles : 6 Articles
Objective To assess the maxillofacial growth of patients with isolated cleft palate following the Sommerlad-Furlow modified technique and compare it with the effect of the Sommerlad technique. Study design A Retrospective Cohort Study. Methods A total of 90 participants, 60 patients with non-syndromic isolated soft and hard cleft palate (ISHCP) underwent primary palatoplasty without relaxing incision (30 patients received the Sommerlad-Furlow modified (S-F) technique and 30 received Sommerlad (S) technique). While the other 30 were healthy noncleft participants with skeletal class I pattern (C group). All participants had lateral cephalometric radiographs at least 5 years old age. All the study variables were measured by using stable landmarks, including 11 linear and 9 angular variants. Results The means age at collection of cephalograms were 6.03 ± 0.80 (5–7 yrs) in the S group, 5.96 ± 0.76 (5–7 yrs) in the S-F group, and 5.91 ± 0.87 (5–7 yrs) in the C group. Regarding cranial base, the results showed that there were no statistically significant differences between the three groups in S–N and S–N-Ba. The S group had a significantly shortest S-Ba than the S-F & C groups (P = 0.01), but there was no statistically significant difference between S-F and C groups (P = 0.80). Regarding skeletal maxillary growth, the S group had significantly shorter Co-A, S- PM and significantly less SNA angle than the C group (P = < 0.01). While there was no significant difference between S-F & C groups (P = 0.42). The S group had significantly more MP-SN inclination than the C group (P = < 0.01). Regarding skeletal mandibular growth, there were no statistically significant differences in all linear and angular mandibular measurements between the three groups, except Co-Gn of the S group had a significantly shorter length than the C group (P = 0.05). Regarding intermaxillary relation, the S-F group had no significant differences in Co-Gn—Co-A and ANB as compared with the C group. The S group had significantly less ANB angle than S-F & C groups (P = 0.01 & P = < 0.01). In addition, there were no significant differences in all angular occlusal measurements between the three groups. Conclusion As a preliminary report, Sommerlad-Furlow modified technique showed that maxillary positioning in the face tended to be better, and the intermaxillary relationship was more satisfactory than that in Sommerlad technique when compared them in healthy noncleft participants....
Objective The muscle quality index (MQI) is a measurement of muscle quality that is directly related to overall health. There has been little study on the relationship between the muscle quality index and periodontitis in American people beyond 30 years. Therefore, this study aimed to explore the link between periodontitis and Muscle quality index (MQI) in older Americans. Methods Three thousand two hundred fifty-eight individuals (aged 30 to 59) who participated in the National Health and Nutrition Examination Survey (NHANES) 2011–2014 were considered eligible for the cross-sectional investigation. A hand dynamometer was used to determine the handgrip strength (HGS). Dual-energy X-ray absorptiometry was employed to calculate ASM (DXA). MQIArm was calculated by dividing the dominant hand’s HGS by the dominant arm’s ASM (in kg/kg). MQIApp was calculated by dividing the dominant hand’s HGS by the ASM (in kg/kg). MQItotal was calculated by dividing the sum of the dominant and non-dominant hands by the ASM (in kg/kg). To investigate the link between muscle quality index and periodontal disease, the weighted multivariable logistic regression models were used. Using generalized additive models, it was determined if a nonlinear connection existed. Then, we developed a two-piece linear regression model and calculated the inflection point using a recursive approach. A mediation study was performed to determine how much of the impact of MQItotal on periodontitis was mediated by potential variables. Results Three thousand two hundred fifty-eight participants from the United States were enrolled. The OR (95% CI) for the relationship between MQItotal and periodontitis in the regression model with fully adjusted variables was 0.69 (0.53–0.91), for the connection between MQIArm and periodontitis was 0.90 (0.84–0.97), and for the association between MQIApp and periodontitis was 0.49 (0.30–0.80). MQItotal and periodontitis were shown to have a J-shaped relationship with a change point of 3.64. Before the change point, the OR (95% CI) was 0.69 (0.58, 0.82). In the analysis of drinking and married status, the interaction was statistically significant. Analysis of mediation showed that alcohol use was responsible for 0.4% (0.10 to 1.2) of the effect of MQItotal on periodontitis. Conclusion In American adults aged over 30, the Muscle Quality Index (MQI) exhibited an independent negative correlation with moderate to severe periodontitis, demonstrating a J-shaped relationship. Furthermore, alcohol consumption may act as a mediator in the association between MQI and periodontitis....
Objective This study aimed to compare the pain intensity and impacts on oral health-related quality of life (OHRQoL) between orthodontic patients treated with clear aligners (CAs) and fixed appliances (FAs). Methods A systematic search was conducted up to December 2022 using PubMed, Web of Science, Cochrane Central Register of Controlled Trials, and Embase. Randomized controlled trials (RCTs) and prospective non-randomized controlled trials (non-RCTs) comparing pain intensity or OHRQoL between patients treated with CAs and FAs were included. The risk of bias (RoB) of individual studies was evaluated using the Cochrane RoB tool 2.0 and ROBINS-I tool for RCTs and non-RCTs, respectively. Further, meta-analyses were separately conducted for each included study using the total oral health impact profile (OHIP)-14 and visual analog scale (VAS) scores to evaluate OHRQoL and pain intensity, respectively. Results Overall, 12 studies (5 RCTs and 7 non-RCTs) were included in the study. Subgroup analyses conducted according to the total OHIP-14 scores revealed that patients treated with CAs had higher OHRQoL at 1 week, 1 month, and 6 months of the treatment. Meanwhile, subgroup analyses conducted according to the VAS scores revealed that pain levels were lower in the CA group only at 3 and 4 days of the treatment. Conclusions Patients treated with clear aligners had higher OHRQoL than those treated with fixed appliances during orthodontic treatment. However, OHRQoL appeared to be similar between the two groups at the end of the treatment. Moreover, patients treated with clear aligners experienced lesser pain than those treated with fixed appliances on the third and fourth day after the initial treatment. The difference in pain intensity between the two treatment modalities was not noted at other time points....
Background. This study aimed to evaluate the effects of using three different resin cements on push-out bond strength (PBS) of fiber posts to root canal dentin of primary teeth. Methods. Fifty primary canines were randomly divided into five experimental groups according to the type of the luting agent used for fiber post cementation after endodontic treatment and post space preparation as the following: Group 1: glass ionomer cement (GIC), Group 2: flowable resin composite, Group 3: etch and rinse (E&R) resin cement, Group 4: self-etch (SE) resin cement, Group 5: self-adhesive (SA) resin cement. The PBS values of the cemented fiber posts to root canals were measured. The data were statistically analyzed using a one-way analysis of variance, followed by Tukey’s post hoc test. Results. The highest mean PBS value was observed in Group 4 (SE resin cement), followed by Group 3 (E&R resin cement), and the lowest PBS value belonged to Group 1 (GIC), followed by Group 5 (p-values<0.05). The mean PBS of Group 3 (E&R resin cement) was significantly higher than those of Groups 1 (GIC), 2 (flowable resin composite), and 5 (SA resin cement) (p-values<0.05). However, no significant difference was found between the mean PBS of GIC and SA resin cement (p-value >0/05). Conclusion. Using SE resin cement for fiber post cementation in primary anterior teeth showed the best results, followed by E&R resin cement. The lowest PBS was observed for GIC, followed by SA resin cement....
Background and Objectives: This review focuses on reviewing studies from the literature regarding the effects of deep margin elevation on the surrounding periodontium. Materials and Methods: A review of the literature was carried out using the following online databases: Embase, The Cochrane Library, MEDLINE-PubMed and Google Scholar. Our search was limited to articles from 2010 to 2023. The search terms consisted of keywords and MeSH terms, which were ‘deep margin elevation’, ‘coronal margin relocation’, ‘periodontium’ and ‘periodontal tissues’. The literature was searched thoroughly by two reviewers. Initially, the titles of the articles were extracted. After removing irrelevant and duplicate articles, abstracts were assessed for relevant articles. Finally, the reviewers analyzed full-text articles. Results: A total of twelve articles, including one randomized clinical trial, three systematic reviews, two prospective cohort, three case series, one a clinical study, one pilot study and one a retrospective study, were selected and analyzed. Conclusions: The review suggests potential benefits of Deep Margin Elevation (DME) over surgical crown lengthening due to reduced invasiveness, yet conclusive effects on periodontal tissue remain unclear, warranting further studies on clinical parameters and inflammatory biomarkers....
Background Lower third molars (L3M) are the last teeth to erupt in the oral cavity. Uneruption of these teeth still raises questions about its causes, in the literature (1) genetic factors, (2) dental lamina activity and, mainly, (3) insufficient growth and development of the bone bases are included. While the lack of space theory influenced by mandibular morphology and size of L3M was argued to be the main reason for L3M impaction, there is a limitation in the literature in examining such association using more accurate tomographic analysis obtained from CBCT. This work aimed to evaluate the relationship between mandibular morphology and the eruption of L3M. Methods In this regard, 85 Cone Beam Computed Tomographies (CBCT), with 147 L3M, were selected from the archives of the Department of Surgery, Stomatology, Pathology and Radiology, Bauru School of Dentistry, obtained using an Accuitomo® Morita device and using the Dolphin Imaging 11.9 software. L3M eruption was related to linear measurements of jaw length (Co-Gn), retromolar space dimension (D2R), mesiodistal width of the L3M crowns, mandibular first molars (L1M) and mandibular canines (LC) and the angle mandibular (Ar-Go-Me). Independent samples t-test, chi-square tests and logistic regression were performed adopting a significance level of 5%. Results The average mandible length of 116.446 mm + 6.415 mm, retromolar space of 11.634 mm + 2.385 mm, mesiodistal size of the L3M of 10.054 mm + 0.941 mm, sum of the mesiodistal widths of the L1M and LC of 15.564 mm + 1.218 mm and mandibular angle of 127.23° + 6.109. There was no statistically significant association between these factors and the eruption. Conclusion With the results obtained in this study, we conclude that the length and angle of the mandible, teeth size and dimension of the retromolar space are not associated with the L3M eruption....
Loading....