Current Issue : July-September Volume : 2024 Issue Number : 3 Articles : 5 Articles
A platform-tolerant RFID (Radio-Frequency Identification) tag is presented, designed to operate across the entire RFID band. This tag utilizes a small Artificial Magnetic Conductor (AMC) structure as a shielding element for an ungrounded RFID tag antenna. It can be easily mounted on various surfaces, including low permittivity dielectric materials, metal objects, or even attached to the human body for wearable applications. The key features of this RFID tag include its ability to be tuned within the worldwide RFID band, achieving a maximum theoretical read range of over 11 m. Despite its advanced capabilities, the design emphasizes simplicity and cost-effective manufacturing. The design and simulations were conducted using CST Studio Suite....
In the paper, a novel design of a wideband power splitter for a four-element antenna array using two RF antiphase segments is proposed. Based on a detailed analysis of the power splitter circuit, an analytical model was set up in the MATLAB environment. The derived analytical model allows the development of a design of the described structure for any operating frequency and estimates the properties of the designed structure. In addition to the RF electrical part, the copper cover is also considered in this study. The copper cover serves as both a support and shielding part of the proposed structure. The electrical part consists of two sections of transmission lines. The first transmission line is symmetrical, while the second transmission line is asymmetrical. The given transmission lines can be realized using any technology (microstrip, coaxial, etc.). A prototype of the proposed wideband splitter operating at 650 MHz with a fractional bandwidth of 84.3% was designed and tested in real-world conditions to prove the concept. The board of the manufactured prototype has dimensions of 25 × 152 mm. A double-sided FR4 material with a substrate height of 1.48 mm, copper thickness of 50 μm, and r ˜= 4.3, with a dielectric loss tangent of 0.021 was used to manufacture the prototype. The prototype was tested and its parameters were verified in practical conditions as a part of the current radio communication system for the 5G band. Under these conditions, verification measurements of the proposed splitter with a four-element antenna array were carried out....
In this paper, a wide-band, low-profile antenna is presented for a high-integration phased array system. The proposed antenna, implemented using a tightly coupled array, operates over roughly the X-K frequency band and is performant at 8 GHz–18.5 GHz. The antenna can scan to ±60 degrees in both the E- and H-planes. Compared to previous tightly coupled antennas with smaller element spacing, the antenna in this paper reaches 9.4 mm, which corresponds to 0.58 λ of high frequency, suitable for engineering application conditions in production. The antenna can be soldered to BGA T/R chips in this space. Additionally, to facilitate flexible assembly for large arrays, the antenna is manufactured modularly using four elements and its parasitic radiation is analyzed. Then, a method for repressing parasitic radiation is presented. Finally, the antenna is fabricated and measured in a microwave chamber, exhibiting an excellent pattern and scanning radiation. The measured performance agrees with the full-wave finite array simulations....
An important element of modern telecommunications is wireless radio networks, which enable mobile subscribers to access wireless networks. The cell area is divided into independent sectors served by directional antennas. As the number of mobile network subscribers served by a single base station increases, the problem of interference related to the operation of the radio link increases. To minimize the disadvantages of omnidirectional antennas, base stations use antennas with directional radiation characteristics. This solution allows you to optimize the operating conditions of the mobile network in terms of reducing the impact of interference, better managing the frequency spectrum and improving the energy efficiency of the system. The work presents an adaptive antenna algorithm used in mobile telephony. The principle of operation of adaptive systems, the properties of their elements and the configurations in which they are used in practice are described. On this basis, an algorithm for controlling the radiation characteristics of adaptive antennas is presented. The control is carried out using a microprocessor system. The simulation model is described. An algorithm was developed based on the Mathcad mathematical program, and the simulation results of this algorithm, i.e., changes in radiation characteristics as a result of changing the mobile position of subscribers, were presented in the form of selected radiation characteristics charts....
In this paper, a novel through mold via (TMV)-embedded fan-out wafer-level package (FOWLP) technology was demonstrated to manufacture the well-designed Antenna in Package (AiP) with ultrathin thickness (0.04 λ0). Double-sided redistribution layers (RDLs) were employed to build the patch antenna, while a TMV interposer was used to connect the front and back RDLs. By optimizing the AiP’s parameters, the patch antenna can achieve a wide impedance bandwidth of 17.8% from 24.2 to 28.5 GHz, which can cover the 5G frequency bands. Compared with previous works, the proposed AiP has significant benefits in terms of its ultralow profile, easy processing, and high gain. Hence, the TMV-embedded FOWLP should be a promising technology for fifth generation (5G) millimeter wave (mm-Wave) applications....
Loading....